Linear Fixtures

FSR8-LED series fluorescent strip channel LED retrofit kits are a simple and cost-effective solution to upgrading existing 8’ strip fixtures into efficient LED strips.

Applications: Commercial facilities, Manufacturing facilities, Warehouse applications, Retail stores

Low-profile linear fixtures provide excellent and even illumination on all surfaces. At only 7 watts per foot, Bravo FROST produces 500 lumens at a crisp sharp 90+ CRI. Each Bravo Frost contains it own driver allowing a 120V feed and longer single runs than low voltage systems. It is one of the most energy efficient products in the market. LED technology eliminates forward heat from the fixture, also no UV or infrared rays to harm artwork or heat sensitive foods.

VSB4 series 4’ LED vaporproof strip fixture is gasketed to provide dust and moisture resistant illumination. It withstands corrosion, splashing water, hose-directed water, and damage from external ice formation.

Eiko 11316 STR2/PS24/835/UD Strip 2 ft. PowerSet 24/20/16W 80CRI 3500K 120-277V 0-10V Dimming

Eiko 11318 STR2/PS24/850/UD Strip 2 ft. PowerSet 24/20/16W 80CRI 5000K 120-277V 0-10V Dimming

Eiko 11317 STR2/PS24/840/UD Strip 2 ft. PowerSet 24/20/16W 80CRI 4000K 120-277V 0-10V Dimming

DESCRIPTION
The MagFit T8/T12 LED Universal Retrofit Kit (URK) installs directly into existing Linear and Troffer type fixtures, providing a cost effective means to transition into DesignLights Consortium, Premium listed, LED lighting without having to replace existing fixtures. After the removal of the fluorescent tubes and tombstones from the existing fixtures, the ballast is removed or simply bypassed. The unique design of the URK light bars are secured to the interior of the existing housing with the use of powerful magnets and mechanical screws. The number of light bars installed within each fixture depends on the amount of light desired by the customer. A power cable is plugged int the end of each MagFit, with the other end of the cable being connected directly to incoming power. If the double-ended Magfits are being installed, the power cable is plugged into the end of the first MagFit in each run. Jumper cables are used to provide end-to-end power to the remaining MagFits in the run (up to 800W per run)

Eiko 20194 XRURK04-16W35B-SNW MagFit Series Universal Retrofit Kit 4ft 16W 3500K 100-277V 80CRI White Single-ended

VSB4 series 4’ LED vaporproof strip fixture is gasketed to provide dust and moisture resistant illumination. It withstands corrosion, splashing water, hose-directed water, and damage from external ice formation.

DESCRIPTION
The MagFit T8/T12 LED Universal Retrofit Kit (URK) installs directly into existing Linear and Troffer type fixtures, providing a cost effective means to transition into DesignLights Consortium, Premium listed, LED lighting without having to replace existing fixtures. After the removal of the fluorescent tubes and tombstones from the existing fixtures, the ballast is removed or simply bypassed. The unique design of the URK light bars are secured to the interior of the existing housing with the use of powerful magnets and mechanical screws. The number of light bars installed within each fixture depends on the amount of light desired by the customer. A power cable is plugged int the end of each MagFit, with the other end of the cable being connected directly to incoming power. If the double-ended Magfits are being installed, the power cable is plugged into the end of the first MagFit in each run. Jumper cables are used to provide end-to-end power to the remaining MagFits in the run (up to 800W per run).

Eiko 20196 XRURK04-16W40B-SYWD MagFit Series Universal Retrofit Kit 4ft 16W 4000K 100-277V 80CRI 0-10V Dimming White Double-ended

DESCRIPTION
The MagFit T8/T12 LED Universal Retrofit Kit (URK) installs directly into existing Linear and Troffer type fixtures, providing a cost effective means to transition into DesignLights Consortium, Premium listed, LED lighting without having to replace existing fixtures. After the removal of the fluorescent tubes and tombstones from the existing fixtures, the ballast is removed or simply bypassed. The unique design of the URK light bars are secured to the interior of the existing housing with the use of powerful magnets and mechanical screws. The number of light bars installed within each fixture depends on the amount of light desired by the customer. A power cable is plugged int the end of each MagFit, with the other end of the cable being connected directly to incoming power. If the double-ended Magfits are being installed, the power cable is plugged into the end of the first MagFit in each run. Jumper cables are used to provide end-to-end power to the remaining MagFits in the run (up to 800W per run).

Eiko 20197 XRURK04-16W50B-SNW MagFit Series Universal Retrofit Kit 4ft 16W 5000K 100-277V 80CRI White Single-ended